Your Leading Fuel Pump Motor Magnet Supplier
Founded Nanjing Lianqiang Magnetic Material Factory on February 19, 2004, and established Xuancheng Lianqiang Magnetic Industry Co., Ltd. on October 16, 2014, specialize in producing various types of permanent magnet segments for DC motors. Our automobile motor magnets include window lift motor magnets, automobile fan motor magnets, starter motor magnets, automobile pedal motor magnets, automobile wiper motor magnets, fuel pump motor magnets, heater motor magnets, throttle motor magnets, exhaust valve motor magnets, and electronic handbrake motor magnets. They are widely used and play a vital role.
Why Choose Us
Complete Qualifications
The company has obtained GB/T19001-2016/ISO9001-2015 quality management system certification and holds the registered trademark "China Lianqiang," demonstrating compliance with national and international quality standards.
Rich Experience
Spanning a site area of 16 mu (approximately 2.67 hectares), the company operates a 4,000-square-meter manufacturing facility and has accumulated over 20 years of specialized experience in the production of magnetic materials.
Production Capacity
The facility includes dedicated workshops for precision grinding, ball milling, and hydraulic processing, supporting an annual output value of approximately RMB 20 million and ensuring consistent, large-scale production capability.
Production Market
Our products are distributed across domestic markets and exported to international regions including Southeast Asia and the Middle East, where they have gained wide recognition and favorable market feedback.
Types of Fuel Pump Motor Magnet
MPV Fuel Pump Motor Magnet
We use a low-loss ferrite material, with the (formula) optimized by adding Manganese Oxide (MnO) and Lithium Oxide (Li₂O). This reduces hysteresis losses by 25%, improving the MPV fuel pump motor magnet's efficiency and reducing heat generation.
Bus Fuel Pump Motor Magnet
We utilize a high-temperature Strontium Ferrite material, enhanced with Yttrium Oxide (Y₂O₃) and Gadolinium Oxide (Gd₂O₃). This formulation raises the Curie temperature to 500°C, ensuring the bus fuel pump motor magnet maintains exceptional stability under continuous operation and high under-hood temperatures.
Truck Fuel Pump Motor Magnet
We use a high-coercivity ferrite material, optimized with additions of Samarium Oxide (Sm₂O₃) and Neodymium Oxide (Nd₂O₃). This results in a very high intrinsic coercivity (Hcj) of 380 kA/m for the truck fuel pump motor magnet.
Specifications of Fuel Pump Motor Magnet
|
Product Name |
Fuel Pump Motor Magnet |
||
|
Material |
Neodymium-Iron-Boron |
||
|
Magnet Shape |
Disc, Cylinder, Block, Ring, Countersunk, Segment, Trapezoid and Irregular shapes and more. Customized shapes are available |
||
|
Magnet coating |
Ni,Zn,Au,Ag,Epoxy,Gold,etc |
||
|
Applications |
Sensors, motors, filter automobiles, magnetics holders, loudspeakers, wind generators, medical equipments, etc. |
||
|
Grade &Working Temperature |
Grade |
Temperature |
|
|
N28-N48 |
80° |
||
|
N50-N55 |
60° |
||
|
N30M-N52M |
100° |
||
|
N28H-N50H |
120° |
||
|
N28SH-N48SH |
150° |
||
|
N28UH-N42UH |
180° |
||
|
N28EH-N38EH |
200° |
||
|
N28AH-N33AH |
200° |
||
Surface Treatment of Fuel Pump Motor Magnet
To protect against corrosion and physical damage, magnets typically undergo surface treatment. Neodymium magnets are particularly vulnerable to corrosion and usually receive protective coatings such as nickel, zinc, epoxy, or gold. These coatings extend the magnet's useful life while preserving its magnetic properties.
The coating thickness must be carefully controlled. Too thin, and it won't provide adequate protection. Too thick, and it creates an unwanted air gap that reduces the magnet's effective strength in applications.
Store your magnets at a sufficient distance from each other so that they don't inadvertently connect. If this is not possible, we recommend the following methods so that you can easily separate the magnets again:
Keep plastic spacer rings that may have come with the original packaging for later use.
Place, for example, a piece of wood, sturdy cardboard, thicker plastic or thin sheet of iron with low ferromagnetic properties between the magnets. This will allow you to slide the magnets off sideways when needed.
- Remove all metallic objects from your person and store well away from the area the magnet will occupy
- Clear the area of all clutter and magnetic materials before opening magnet container.
- Open the magnet container on a non-magnetic work surface. Wood or plastic surfaces are preferable. Make sure there is not a magnetic surface underneath the wood or plastic work surface.
- Open only one magnet at a time. Never have two unprotected magnets within four feet of each other.
- Never leave an exposed magnet unattended. Return magnet to its protective enclosure before leaving the area.
- Use only non-magnetic tools, fixturing, and measuring devices when working with magnets.
- Be sure to wear safety glasses at all times when handling magnets.
- Mark magnet work area with appropriate warning labels and signs and barricade area if possible. Alert co-workers of the hazards, and keep all unauthorized people out of the work area.
Ordering Process
Send Us Inquiry
Receive Our Quotation
Negotiate Details
Confirm the Sample
Sign Contract/Deposit
Mass Production
Cargo Ready/Quality Inspection
Balance/Delivery
Further Cooperation
Packing & Transportation
FAQ
As one of the most professional fuel pump motor magnet manufacturers and suppliers in China, we're featured by quality products and low price. Please rest assured to buy discount fuel pump motor magnet made in China here from our factory.
Car Fuel Pump Motor Magnet, Engineering Vehicle Fuel Pump Motor Magnet, SUV Fuel Pump Motor Magnet