Auto Wiper Transmission Magnets
Auto wiper transmission magnets power the gear and linkage system of wipers. These magnets are different from simple motor magnets because they work with reduction gears. They need very steady torque output. Our 22 years of production experience taught us how to control flux consistency. We limit flux variation within 3% for each batch of product.
Product Introduction
Magnets for the Whole Drive System
Auto wiper transmission magnets power the gear and linkage system of wipers. These magnets are different from simple motor magnets because they work with reduction gears. They need very steady torque output. Our 22 years of production experience taught us how to control flux consistency. We limit flux variation within 3% for each batch of product. Our QC team measures flux on a dedicated meter. We also check chord width and arc height with custom gauges. Our 9 grinding lines maintain dimensional tolerance to ±0.3 mm. This precision ensures the transmission gears receive smooth power. Every order of product comes with a full dimensional and magnetic test report.

Strong Coercivity for Gear Resistance
Auto wiper transmission magnets face resistance from the linkage mechanism. This resistance can cause momentary torque spikes. Our magnets use Y30H, Y33H, and Y35 grades. Intrinsic coercivity ranges from 320 to 400 kA/m. High coercivity helps the magnet survive these spikes without losing strength. Remanence stays between 380 and 440 mT. This gives the transmission enough force to move the wiper arms smoothly. We also control working temperature up to 250°C. This covers under-hood conditions for most vehicles. Our sintering process uses a computer-controlled profile. This profile ensures consistent crystal growth across the entire batch. Consistent crystals mean consistent magnetic output for product.
Trusted by Transmission System Makers
Many wiper system assemblers in China use our auto wiper transmission magnets. These assemblers supply both domestic and export markets. We also ship directly to overseas transmission manufacturers. Packaging uses cartons with foam liners. This protects the magnets during sea freight. We support EXW and FOB. Payment is 30% deposit and 70% before shipment. Custom orders need 50% deposit. MOQ is 100,000 pieces. Sample delivery takes 10 days if we have the tooling. New tooling takes 45 days. We offer a 3-month warranty. Our product are traceable to specific kiln runs. We also keep retained samples for two years. This traceability helps us address any field performance questions with solid data.
|
Parameter |
Value |
|
Material Grades |
Y30H, Y33H, Y35 |
|
Remanence (Br) |
380 – 440 mT |
|
Coercivity (Hcb) |
220 – 280 kA/m |
|
Intrinsic Coercivity (Hcj) |
320 – 400 kA/m |
|
Max. Energy Product (BH)max |
28 – 36 kJ/m³ |
|
Working Temperature Range |
-30°C to +250°C |
|
Density |
4.8 – 5.0 g/cm³ |
|
Magnet Size |
Custom per customer drawing |
|
Dimensional Tolerance |
±0.3 mm |
|
Surface Treatment |
Uncoated or custom coating |
Hot Tags: auto wiper transmission magnets, China auto wiper transmission magnets manufacturers, suppliers, factory, Bus Wiper Motor Magnet, Car Wiper Motor Magnet, Engineering Vehicle Wiper Motor Magnet, MPV Wiper Motor Magnet, SUV Wiper Motor Magnet, Truck Wiper Motor Magnet
You Might Also Like
Send Inquiry







