Intermittent Wiper Motor Magnets
Intermittent wiper motor magnets are designed for wiper systems that pause between wipes. This mode is used in light rain or mist. The motor starts and stops many times. Each start creates a current surge. Our product use Y30H grade with intrinsic coercivity of 300 to 380 kA/m. This high value prevents demagnetization from repeated surges. Our 30 workers monitor each pressing and grinding step.
Product Introduction
Made for Stop-Start Operation
Intermittent wiper motor magnets are designed for wiper systems that pause between wipes. This mode is used in light rain or mist. The motor starts and stops many times. Each start creates a current surge. Our product use Y30H grade with intrinsic coercivity of 300 to 380 kA/m. This high value prevents demagnetization from repeated surges. Our 30 workers monitor each pressing and grinding step. We test every batch of product for flux after sintering. We also test again after grinding. This double-check system catches any drift early. Every shipment of product includes a test report with actual flux readings.

Stable Flux through Thousands of Cycles
Intermittent wiper motor magnets must survive thousands of start-stop cycles. Our magnets keep remanence between 380 and 430 mT. Coercivity stays at 210 to 270 kA/m. These values do not drop significantly after repeated use. Why? Our sintering process uses a slow heating and cooling profile. This profile reduces internal stress. Lower stress means better cycle life. We also control dimensional tolerance to ±0.3 mm. Tight dimensions keep the air gap consistent. Consistent air gaps reduce torque variation during each start. We offer anti-rust coating for product used in humid climates. Coated magnets resist corrosion better. We check coating thickness with a special gauge before packing.
Reliable Choice for Rain-Sensing Systems
Intermittent wiper motor magnets are often used in rain-sensing wiper systems. These systems adjust wipe frequency based on rainfall. The motor must respond instantly every time. Our magnets deliver that instant response. We supply product to motor assemblers across China. We also export to Europe and Japan. Packaging uses trays with separators to prevent chips. We support EXW and FOB. Payment is 30% deposit and 70% before shipment. Custom orders need 50% deposit. MOQ is 100,000 pieces. Sample lead time is 10 days with existing molds. New molds take 45 days. We can provide production photos on request. Our product come with a 3-month warranty. We also retain samples for two years to support traceability.
|
Parameter |
Value |
|
Material Grades |
Y30H, Y33 |
|
Remanence (Br) |
380 – 430 mT |
|
Coercivity (Hcb) |
210 – 270 kA/m |
|
Intrinsic Coercivity (Hcj) |
300 – 380 kA/m |
|
Max. Energy Product (BH)max |
26 – 34 kJ/m³ |
|
Working Temperature Range |
-30°C to +200°C |
|
Density |
4.8 – 5.0 g/cm³ |
|
Magnet Size |
Custom per customer drawing |
|
Dimensional Tolerance |
±0.3 mm |
|
Surface Treatment |
Uncoated or anti-rust coating |
Hot Tags: intermittent wiper motor magnets, China intermittent wiper motor magnets manufacturers, suppliers, factory, automobile wiper motor magnet, Car Wiper Motor Magnet, Engineering Vehicle Wiper Motor Magnet, MPV Wiper Motor Magnet, SUV Wiper Motor Magnet, Truck Wiper Motor Magnet
You Might Also Like
Send Inquiry







