Sedan Fan Motor Magnets
We have been making sedan fan motor magnets since 2004. Our factory runs daily with 30 workers. Many of them have over 15 years of hands-on pressing and grinding experience. We know that product face constant heat and vibration under the hood. Our team checks raw powder color and particle size every morning before milling. This daily routine comes from years of trial and error. We also keep records of each press machine's pressure curve. When we say our product survive -30°C to 250°C, we mean it because we have tested them in our own kiln cycles. That long experience directly benefits every customer who buys product from us.
Product Introduction
22 Years of Real Shop-Floor Experience
We have been making sedan fan motor magnets since 2004. Our factory runs daily with 30 workers. Many of them have over 15 years of hands-on pressing and grinding experience. We know that product face constant heat and vibration under the hood. Our team checks raw powder color and particle size every morning before milling. This daily routine comes from years of trial and error. We also keep records of each press machine's pressure curve. When we say our product survive -30°C to 250°C, we mean it because we have tested them in our own kiln cycles. That long experience directly benefits every customer who buys product from us.

Material Science You Can Verify
We use Y30H and Y35 ferrite grades for sedan fan motor magnets. These grades offer remanence of 380 to 440 mT and intrinsic coercivity up to 400 kA/m. Why do these numbers matter? Higher coercivity means the magnet resists demagnetization when the motor gets hot. Our sintering furnace runs a 12-hour temperature profile. This slow heating allows crystal grains to grow fully. Fully grown grains hold magnetic domains better. We also control inner arc roughness to Ra ≤ 1.2 µm. Smoother arcs reduce air gap variation. This precision is why our product deliver stable torque over long drives. Every batch of product includes a printed test report with actual measured values.
Built for Global Auto Supply Chains
Our sedan fan motor magnets serve motor assemblers in Jiangsu, Zhejiang, and Guangdong provinces. Many of these assemblers supply OEM cooling fan systems. We also ship product directly to overseas buyers in Europe and Southeast Asia. Our MOQ is 100,000 pieces, but we accept smaller trial orders for new partners. We pack each piece with separators to prevent edge chipping. Standard orders require 30% deposit and 70% before shipment. We provide production photos on request. We also offer a 3-month warranty against material defects. After shipment, we keep retained samples for two years. This traceability gives our product an extra layer of trust. For any cooling fan project, our product are a proven choice.
|
Parameter |
Value |
|
Material Grades |
Y30H, Y33H, Y35 |
|
Remanence (Br) |
380 – 440 mT |
|
Coercivity (Hcb) |
220 – 280 kA/m |
|
Intrinsic Coercivity (Hcj) |
320 – 400 kA/m |
|
Max. Energy Product (BH)max |
28 – 36 kJ/m³ |
|
Working Temperature Range |
-30°C to +250°C |
|
Density |
4.8 – 5.0 g/cm³ |
|
Magnet Arc Shape |
Custom per customer drawing |
|
Dimensional Tolerance |
±0.5 mm |
|
Surface Treatment |
Uncoated or custom coating |
Hot Tags: sedan fan motor magnets, China sedan fan motor magnets manufacturers, suppliers, factory
You Might Also Like
Send Inquiry







