Construction Vehicle Fan Motor Magnets
Our workshop sees heavy pressing every day. We make construction vehicle fan motor magnets for excavators, loaders, and bulldozers. These machines work in mud, dust, and heat above 100°C. Ordinary magnets fail there. Our 22-year experience taught us how to adjust ferrite composition for these conditions.
Product Introduction
Tough Parts from a Rugged Factory Floor
Our workshop sees heavy pressing every day. We make construction vehicle fan motor magnets for excavators, loaders, and bulldozers. These machines work in mud, dust, and heat above 100°C. Ordinary magnets fail there. Our 22-year experience taught us how to adjust ferrite composition for these conditions. We increased intrinsic coercivity to 450 kA/m. Our senior workers check each press cycle for large-size parts. Wall thickness often reaches 5 to 15 mm. Our 150-ton presses form these thick magnets in one stroke. This method avoids weak joints. We also run a slower sintering curve for thick parts. This extra care ensures our product hold flux even after thousands of work hours.

High Coercivity for Extreme Loads
We use Y35, Y40, and Y30H-2 grades for construction vehicle fan motor magnets. Remanence ranges from 410 to 460 mT. Intrinsic coercivity goes up to 450 kA/m. The working temperature hits 350°C. These numbers are higher than automotive grades because construction machines run harder and longer. Higher coercivity means the magnet keeps its strength even when the motor stalls temporarily. We control dimensional tolerance to ±0.8 mm for large arcs. This is looser than small parts but still tight for heavy equipment. Our 9 grinding lines maintain inner arc smoothness. Smooth arcs reduce vibration in the fan motor. We test every batch of product for flux and size. Test reports are available with each shipment.
Proven in Mining and Earthmoving
Our product already serve motor makers in Jiangsu and Shandong. Those regions are hubs for construction equipment. Many end users run these machines in quarries and road projects. We also ship directly to overseas buyers in Australia and Africa. Our packaging uses extra-thick cartons and foam inserts. Large magnets need more protection during sea freight. We support EXW and FOB. MOQ is 100,000 pieces. Custom tooling takes about 45 days. We suggest you provide your machine model and ambient temperature when inquiring. This helps us select the best product for your application. We offer a 3-month warranty against defects. Our retained samples let us trace any issue back to the production date.
|
Parameter |
Value |
|
Material Grades |
Y35, Y40, Y30H-2 |
|
Remanence (Br) |
410 – 460 mT |
|
Coercivity (Hcb) |
260 – 310 kA/m |
|
Intrinsic Coercivity (Hcj) |
380 – 450 kA/m |
|
Max. Energy Product (BH)max |
32 – 40 kJ/m³ |
|
Working Temperature Range |
-40°C to +350°C |
|
Density |
5.0 – 5.2 g/cm³ |
|
Wall Thickness |
5 – 15 mm (custom) |
|
Inner Arc Angle |
Custom per customer drawing |
|
Dimensional Tolerance |
±0.8 mm |
Hot Tags: construction vehicle fan motor magnets, China construction vehicle fan motor magnets manufacturers, suppliers, factory
You Might Also Like
Send Inquiry








